Author handlebar risers  (Read 2382 times)

0 Members and 1 Guest are viewing this topic.

  • Offline w8maker   us

    • Z900 Junior Member  ‐    9
    • *
    • Topic Author

    Offline w8maker

    • Z900 Junior Member
    • *
    • Topic Author
    • Posts: 9
    • Bike: 2019 Z 900 ABS
    • Town / City: Milwaukie
    • Country: us
    handlebar risers
    on: Jun 25, 2019, 10.19 pm
    Jun 25, 2019, 10.19 pm
    Will the cables, hoses and instrument cluster work with a 1" bar riser?

  • Offline Gerrit   za

    • Z900 Junior Member  ‐    6
    • *
      #1

    Offline Gerrit

    • Z900 Junior Member
    • *
    • Posts: 6
    • Town / City: Midrand
    • Country: za
    Re: handlebar risers
    Reply #1 on: Aug 18, 2022, 03.06 pm
    Aug 18, 2022, 03.06 pm
    I added these 40mm Bar Risers to my bike, a few days after I received it,  Quality kit from SW Motech.
    There is an additional 10mm, spacer that can be added for a total of just over 50mmm.
    At 40mm it suits me fine, and there is no cable snag, and no mods to the Display is required


  • Offline broderp   us

    • Z900 Pro  ‐    248
    • ***
      #2

    Offline broderp

    • Z900 Pro
    • ***
    • Posts: 248
    • Bike: Z900 ABS
    • Country: us
    Re: handlebar risers
    Reply #2 on: Oct 03, 2022, 07.53 pm
    Oct 03, 2022, 07.53 pm
    @Gerrit   That doesn't look like it mounted up OEM.  You are not using a few screws that secure the turn signal assembly and it looks like you modified the cluster mount.  Not sure that would be considered "no mods".

    I looked into it a while back, but on my Z (2020) it seems that I would have some cable issues and the TFT display would definitely be a problem - unless there is some slack to be had.

  • Offline fearundead   in

    • Z900 Junior Member  ‐    3
    • *
      #3

    Offline fearundead

    • Z900 Junior Member
    • *
    • Posts: 3
    • Bike: Kawasaki Z900 2021
    • Town / City: Ahmedabad
    • Country: in
    Re: handlebar risers
    Reply #3 on: Oct 04, 2022, 05.09 pm
    Oct 04, 2022, 05.09 pm
    @broderp Ya its not possible to secure those 2 screws that secure the turn signal with out making a bracket for them. But the front don't seem to move or vibrate even with out it.

    I have done a 1 3/4 inch risers from rox as handle bars were too low for me.
    I had to also replace my stock break line for one from hel performance.