Head cowl disassembly on 2020

[Zealous 900]

I got a bit of a silly question here but I’m wondering if anyone has removed the silver fairing piece of the front cowl just above the headlight/under the windshield? I’m currently wrapping most of the bike satin black with the exception of the tank and the bottom silver fairings but the silver head just never sat right with me and I want to wrap it too. I just am struggling to find any videos on it for the 2020 as it seems to be different than previous models. Here’s what I’ve got so far but as you can see that silver head just doesn’t fit with the rest, so any help would be appreciated. It’s holding me up with two screws at the very center that I can’t get to so I need the whole headlight removed and I don’t want to bite off more than I can chew especially if it is only a few steps and I just start removing everything lol

[RobZ900]

If the headlight on the 2020 is anything like the previous model, it’s only 4 bolts and the whole assembly comes off. From there, you should be able to figure out how to take it off.

[Zealous 900]

It looks a bit different from the videos I’ve watched but I’ll give them another look and try again I’m sure they couldn’t have made it too difficult I was just hoping for an easy way like the two side pieces of plastic on the fairing, thanks though I appreciate it

[ras]

I doubt they changed the mounting system on the 20 as it has mounted the same way since 03. The assembly slides on two posts.
Remove the bolts and then lift up and the whole assembly will come off.

[Zealous 900]

After some messing around with it I did figure it out. Maybe the guys I was looking at was a bit different because he had an aftermarket windscreen and the bracket holding it was different but there are also two more bolts I had to undo to wiggle it loose and probably could’ve done the two closer to the TFT display but didn’t feel like it lol this is the final product though I appreciate y’all’s help

[KawaJagz]

That looks much better 👍