Author Coolant flush & Bleeding air from system  (Read 668 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Gloff   au

    • Z900 Member  ‐    18
    • **
    • Topic Author

    Offline Gloff

    • Z900 Member
    • **
    • Topic Author
    • Posts: 18
    • Bike: Z900 (2018)
    • Town / City: Kempsey
    • Country: au
    Coolant flush & Bleeding air from system
    on: Sep 28, 2022, 02.14 am
    Sep 28, 2022, 02.14 am
    Hey everyone..  After a coolant flush , Anyone no if theres a "air bleed "  screw on the coolant system or .. is it a Fill / Run / Recheck type senario ?     2018 model  Please & Thanks !

  • Offline Cazzy_R   england

    • Z900 God  ‐    2980
    • *****
      #1

    Offline Cazzy_R

    • Z900 God
    • *****
    • Posts: 2980
    • Bike: 2017 z900
    • Town / City: Merseyside/W Lancs.
    • Country: england
    Re: Coolant flush & Bleeding air from system
    Reply #1 on: Sep 28, 2022, 11.01 am
    Sep 28, 2022, 11.01 am
     There isn't a bleed point I'm aware of.
     I filled it and ran it with the cap off until hottish then put the cap on and ran it until the fan cut in. Let it cool and checked levels. Did gentle hose.squeezing and shook things about during final fill to help release any trapped air. All good.