Hand/wind guards for SE

[RobZ900]

Again, the SW Motech Kobra hand guards stick out here. Here’s 2 pictures - the first is how they look as standard, the second is with the extension for wind protection. If the concern is that your hands will be too hot with normal hand guards, you could use these and remove the extension when the weather is warmer.




Failing that, if you get any hand guards that fit at the bar end, it’s not exactly a lot of work to undo 2 bolts and remove the guards completely.

[Andreasy]

Originally Posted by RobZ900

Again, the SW Motech Kobra hand guards stick out here. Here’s 2 pictures - the first is how they look as standard, the second is with the extension for wind protection. If the concern is that your hands will be too hot with normal hand guards, you could use these and remove the extension when the weather is warmer.




Failing that, if you get any hand guards that fit at the bar end, it’s not exactly a lot of work to undo 2 bolts and remove the guards completely.

Good, but do they fit the Z900se?

[RobZ900]

Well they only attach by screwing into the end of the bars, so no clamp in the way of the master cylinder or brake fluid reservoir.

[Andreasy]

Originally Posted by RobZ900

Well they only attach by screwing into the end of the bars, so no clamp in the way of the master cylinder or brake fluid reservoir.

See the red mark. This is where the problem is with SE. That seems to be on the inside, not the bar ends

[RobZ900]

That’s just the first picture I pulled up. They make them so they attach at the bar end instead too.

[Gerrit]

The Barkbuste Handguards, attach only at the Bar End.

Really solid and well made, and adds additional wind protection.

The "plastics" are also avaialbel in a selection of colours to match your bike.

[Andreasy]

Originally Posted by Gerrit

The Barkbuste Handguards, attach only at the Bar End.

Really solid and well made, and adds additional wind protection.

The "plastics" are also avaialbel in a selection of colours to match your bike.

Not SE

[Gerrit]

Standard or SE, it is Irrelevant, the Barbusters will fit.
It is very simple, it is a solid 5mm Bar, that attaches to the Bar End, and thats it.
The plastics then screw onto this solid bar, it is a 5min install.

[Zed62]

I fitted Polisport Nomads, $69.00 Canadian.  Perfect fit and look great.
https://www.polisport.com/en/off-road/handguards/protetores-de-mao/nomad-handguard-black-dual-sport-and-trail_p2.html