Change braking from axial to radial

[Kawarider900]

Originally Posted by Cazzy_R

The stanchion (tube) and the bottom lug.
 Caliper is 108mm.
 From:
 https://www.motorcyclespareparts.eu/es

is it 108mm from one brake hole to the other? Otherwise it doesn't work for me.
I have a 108mm brembo m4.

[Cazzy_R]

Originally Posted by Kawarider900

is it 108mm from one brake hole to the other?

 Yeah.
 Hang on though!
 I would not be at all certain that even if you obtained the lugs from the RS that they would be compatible with the Z's suspension internals.
 Remember the Z has a damper cartridge in one side only while the RS has it in both.
 Unless you have access to engineering facilities and the knowledge how to use them you would be in a much better place if you aquired complete legs from an RS.
 

[Kawarider900]

I don't understand the adjustments. I have Andreani mounted and it is regulated on both bottles from above.

[Kawarider900]

Originally Posted by Cazzy_R

Yeah.
 Hang on though!
 I would not be at all certain that even if you obtained the lugs from the RS that they would be compatible with the Z's suspension internals.
 Remember the Z has a damper cartridge in one side only while the RS has it in both.
 Unless you have access to engineering facilities and the knowledge how to use them you would be in a much better place if you aquired complete legs from an RS.

I get it. It has an adjustment below on the right side only.
can't be undone?

[Cazzy_R]

Originally Posted by Kawarider900

I don't understand the adjustments. I have Andreani mounted and it is regulated on both bottles from above.

Andreani! Oh. A whole new ball game.
.

[Cazzy_R]

Originally Posted by Kawarider900

I get it. It has an adjustment below on the right side only.
can't be undone?

I didn't mean that but yeah thats another thing to consider.

[Kawarider900]

So I don't know what you mean. Sorry mate, I don't speak English and I use google translate to understand each other.

[Kawarider900]

Little by little I am going to do the conversion. In principle, the entire RS fork is not worth it, because it is longer than my original one.
And the SE fork I can't put andreani suspension and it has 100 mm brembo.

SOLUTION: Only Z900 RS dropouts, which are 108mm and the gold bottles are from the z900 50th anniversary.


If you want, I will go up the process step by step.

Originally Posted by Cazzy_R

The stanchion (tube) and the bottom lug.
 Caliper is 108mm.
 From:
 https://www.motorcyclespareparts.eu/es

[Kawarider900]

[Cazzy_R]

Watching!