Author Looking for bolt specs for z900  (Read 1366 times)

0 Members and 4 Guests are viewing this topic.

  • Offline Lookitsch   us

    • Z900 Junior Member  ‐    3
    • *
    • Topic Author

    Offline Lookitsch

    • Z900 Junior Member
    • *
    • Topic Author
    • Posts: 3
    • Town / City: Berkeley
    • Country: us
    Looking for bolt specs for z900
    on: Sep 20, 2023, 07.26 pm
    Sep 20, 2023, 07.26 pm
    Hello. 

    I have a 2019 z900 and yesterday I discovered that a bolt fell out of my rear turn signal assembly, so now it is hanging on the wires.  It's the bolt that holds together the mount on one side of the bracket and a steel plate on the other side.  I still have the steel plate, but the bolt is gone.

    I looked in the shop manual and it doesn't say anything about the specs for the bolt.  Of course I can take out the second turn signal's bolt and measure it, but it means I'll have to install both turn signals later and it's a very uncomfortable proposition because of the way it was designed, so I'd prefer to avoid it if I could. 

    My question is - does anyone know what are dimensions and thread on that bolt so I could buy a replacement?  Or is there a place online that has this info?  I tried googling it but couldn't find anything relevant.

    Thank you!
    Luka

  • Online renegade4x4   us

    • Z900 Junior Member  ‐    6
    • *
      #1

    Online renegade4x4

    • Z900 Junior Member
    • *
    • Posts: 6
    • Town / City: Sarasota, FL
    • Country: us
    Re: Looking for bolt specs for z900
    Reply #1 on: Sep 20, 2023, 07.49 pm
    Sep 20, 2023, 07.49 pm
    Can you look at the other side maybe and remove that screw and see if you can find it at Home Depot or a home improvement store?   That is what I would do.

  • Offline Lookitsch   us

    • Z900 Junior Member  ‐    3
    • *
    • Topic Author
    • #2

    Offline Lookitsch

    • Z900 Junior Member
    • *
    • Topic Author
    • Posts: 3
    • Town / City: Berkeley
    • Country: us
    Re: Looking for bolt specs for z900
    Reply #2 on: Sep 20, 2023, 07.54 pm
    Sep 20, 2023, 07.54 pm
    Like I said in the original post, yes, I can, but z900 designed their rear turn signal assemble in a way which makes it very awkward to screw it back in, so I am trying to avoid it if possible.

  • Offline n_zoomz   us

    • Z900 Member  ‐    75
    • **
      #3

    Offline n_zoomz

    • Z900 Member
    • **
    • Posts: 75
    • Bike: 2019 Z900
    • Town / City: Gainesville
    • Country: us
    Re: Looking for bolt specs for z900
    Reply #3 on: Sep 21, 2023, 07.32 pm
    Sep 21, 2023, 07.32 pm
    You can check partzilla for the part diagram and if they don't have the part in stock it will at least give you the specs for your local hardware store

  • Offline Lookitsch   us

    • Z900 Junior Member  ‐    3
    • *
    • Topic Author
    • #4

    Offline Lookitsch

    • Z900 Junior Member
    • *
    • Topic Author
    • Posts: 3
    • Town / City: Berkeley
    • Country: us
    Re: Looking for bolt specs for z900
    Reply #4 on: Sep 21, 2023, 07.43 pm
    Sep 21, 2023, 07.43 pm
    *Originally Posted by n_zoomz [+]
    You can check partzilla for the part diagram and if they don't have the part in stock it will at least give you the specs for your local hardware store

    What an awesome recommendation, thank you!!!  I had no idea such site exists.  You rock, sir (mam?).

  • Offline n_zoomz   us

    • Z900 Member  ‐    75
    • **
      #5

    Offline n_zoomz

    • Z900 Member
    • **
    • Posts: 75
    • Bike: 2019 Z900
    • Town / City: Gainesville
    • Country: us
    Re: Looking for bolt specs for z900
    Reply #5 on: Sep 22, 2023, 06.53 am
    Sep 22, 2023, 06.53 am
    sir is good  :152:
    Glad it was helpful, there's also revzilla which is another big site with parts diagrams. Good luck!

  • Offline Taibhse   pl

    • Z900 Member  ‐    46
    • **
      #6

    Offline Taibhse

    • Z900 Member
    • **
    • Posts: 46
    • Bike: Z900 ABS 2023
    • Town / City: Wroclaw
    • Country: pl
    Re: Looking for bolt specs for z900
    Reply #6 on: Sep 22, 2023, 08.45 pm
    Sep 22, 2023, 08.45 pm
    *Originally Posted by n_zoomz [+]
    You can check partzilla for the part diagram and if they don't have the part in stock it will at least give you the specs for your local hardware store

    This page has saved me at least a dozen times.
    I just love it.