1
28 Sep 23, 17:59 pm
|
2
Modifications, Accessories, and Appearance / Re: Airbox modification« Last post by 12:1 on Today at 12:56 pm »He is still about with a brave face. He is a battler but the cancer has spread.
https://m.youtube.com/watch?v=0OGetVyRq7g&pp=ygUgZGFsZSB3YWxrZXIgaG9sZXNob3QgcGVyZm9ybWFuY2U%3D 3
Modifications, Accessories, and Appearance / Re: Airbox modification« Last post by Cazzy_R on Today at 10:41 am »4
Modifications, Accessories, and Appearance / Re: Airbox modification« Last post by Cazzy_R on Today at 10:40 am »5
Z900 - Main Chat board / Re: Changing indicators« Last post by Katujenkauhu on Today at 08:15 am »Hey,
I did this a while ago, indicators look good but you might need to change your indicator relay so keep that in mind :) When i installed the blinkers, all the lights started acting weird and iirc the bike didn't start ![]() A new realy with only 2 pins fixed the issue ![]() 6
Z900 - Main Chat board / Re: why Z900 2024 is Red , and why Australia only gets 1 colour option ?« Last post by Marcel on Today at 05:30 am »Looks good! I had a red ninja years ago. Loved that bike!
7
Modifications, Accessories, and Appearance / Re: Airbox modification« Last post by 12:1 on Today at 03:02 am »Dale Walker has lost his battle with prostrate cancer. All the best Dale, thanks for all the effort.
Au$50 worth. Aliexpress flexi exhaust tube, spa bath motor pvc fittings, loctite metal weld epoxy and 3 bond 1207b. Grille came off a spare rad guard I had lying about. Z9 airbox on the left, RS on the right. ![]() 8
New Member Introductions / Re: Coolant adding« Last post by Cazzy_R on Yesterday at 10:37 am » You do need to maintain a level in the resevoir tank too. There is a yellow dot on the tank denoting the cold level.
![]() 9
Maintenance and Servicing / Re: side stand wobble / free play« Last post by 3alfa3 on Yesterday at 09:40 am »Normal
10
Maintenance and Servicing / side stand wobble / free play« Last post by Erwin on Yesterday at 09:26 am »Hi,
Yesterday, I noticed that the side stand on my 2018 Z appears to be loose. The main bolt is tight. I don't know if it's normal for it to be like this, nor can I remember if it has been like this the whole time. Could anyone check theirs and see if it's doing the same, please? |